SNECI provides training for the automotive industry in the following categories :
For further details on the different courses, to book a training or to receive additional information please click on the respective training category.
Practical oriented training session offers our trainers tools for strategic analysis, presentation of B2B automotive customer portal, an overview of the different types and expectations of audits performed by clients. Real examples, summary tests and involving in case studies will enable your people understand the market and the requirements of the automotive sector.
This training will give you guidance to develop a Request For Quotation from an automotive OEM or Supplier, optimize your chances of success and improve your commercial success chances.
This training gives the definitions of the different phases needed to manage efficiently a project. It will allow you to understand the different phases of development, to know the OEM requirements and to ensure the effective management of your projects.
The training aims to make you acquire the fundamentals of the IATF 16949 standard in order to implement them in your automotive quality certification project.
This training will enable you to understand the process audit following VDA 6.3 requirements and provide guidance to use it as a method for process analysis based on the evaluation of processes' performance as well as the interfaces and the supporting functions in the project and serial phase.
FIEV 2.0 Audit preparation training aims to introduce the FIEV 2.0 Standard. It will give you input and key success factors for audit preparation for self-assessment, for internal audits and before official audits.
This training is for suppliers or potential suppliers interested in understanding the requirements of PSA through the SQM (Supplier Quality Manual) and enable to implement the provisions, methods and tools for successful project .
This training is to permit potential suppliers or suppliers of the Renault group to understand the Renault project development methodology, know the purchasing quality tools and can implement the methods and tools to make their Renault projects a success.
The RSA B2B portal tools training provide overview of most important tools used for managing claims, project and provide information about supplier performance. Training is updated at the last changes implemented in 2018.
This training is for suppliers working with customers PSA & RENAULT NISSAN. It will help you to understand the working methods and tools as well as project management and B2B portal management of these manufacturers.
This training gives you a complex approach to audits, it is aimed at those who wish to assimilate and implement a structured approach, organize and perform audits of production processes.
This training will allow the participants to acquire the fundamentals of the APQP, PPAP, FMEA, MSA, SPC manuals in order to implement them in your internal automotive project management or at your suppliers.
This training will allow participants to understand the APQP/PPAP methodology and its application for managing quality for an automotive project. Participants will assimilate the APQP/PPAP approach linked to project management in order to deploy it.
The purpose of the training is to introduce you to the tools of the MSA - AIAG manual to be able to verify and qualify your measuring systems by variable and attribute.
The purpose of the training is to introduce you to the tools of the SPC - AIAG manual in order to acquire the basic concepts of Statistical Process Control to implement and manage the data.
The purpose of the training is to be capable to make a Process FMEA, it will help you to better prepare your FMEA, by building a multidisciplinary team working on reliable input data in order to be able to lead working groups for the implementation of your FMEA.
Reverse FMEA is a risk assessment method based on reality and not predictive reliability. The purpose of the training is to introduce you with the FMEA tool, it will help you perform a reverse FMEA.
This training will allow participants to develop their knowledge to deal with problem solving: Improve defect detection, manage quality crisis, manage quality firewalls, manage problem solving in the organization with Fast Response / QRQC processes, lead workshops and use specific tools like 8D, QRQC, 5W, PDCA, and put them into practice through exercises.
This training will allow participants to develop their knowledge of problem solving methods through the 8D/QRQC method & process and to put them into practice through exercises. It will allow you to lead or participate in problem solving groups.
The training will enable you to carry out multi-level audits and to optimize your standards. Multi-level audit and LPA purpose is to verify, through various levels of the company, the proper application of the standards to ensure that procedures, work instructions, inspection plans, packaging lines, 5S rules and error prevention systems are in place, known and respected.
The GD&T training provides valuable insights on GD&T, datum systems, geometric tolerances, gauges solutions, and typical design solutions used nowadays in the automotive Industry. The training is complemented with additional exercises and gauge design workshops. This training is acc. to ASME Y14.5M-2009 and ISO 1101.
The training will provide you the basic knowledge and skills to start Lean Manufacturing deployment into your organization. You will understand and know the main Lean principles and tools and then be able promote the benefits and the savings associated with the implementation of Lean Manufacturing practice.
This training enable you to know 5S methods and it’s application on a pilot project during a workshop with your team. 5S practice purpose is to set up a safe, clean and tidy-up work environment and set up baselines for continuous improvement culture.
This training enable you to learn and practice the SMED to reduce tool change-over time, reduce production lot size, give more flexibility on your production schedule and then reduce your stock levels.
This VSM / MIFA training permit to learn how to map easily the flow of materials and information from suppliers, your workshops to your customers facilities. This gives the capacity to perform a diagnostic, identify bottlenecks, muda in the flow, and initiate a process improvement plan in your manufacturing workshop.
GLOBAL MMOG/LE training is addressed to automotive suppliers that are interested in assessing their logistics capability and highlighting the weak points in their logistics organization. Global MMOG/LE standard is the right tool to achieve those objectives, continuously improve logistics standards, significantly reduce logistics costs and fulfill customer expectations. GLOBAL MMOG/LE V4 is a logistics evaluation tool recommended by GALIA/ODETTE.
This training is addressed to suppliers or potential suppliers of PSA Group that are interested in using all the logistics applications of the PSA B2B Portal.
This training is addressed to suppliers or potential suppliers of Renault to be able to use all the logistics applications of the Renault B2B Portal.
This training is for project team members who need to improve their leadership skill. It will allow you to adapt your project manager's behaviors to increase the efficiency of the team and create a relationship of trust with the project actors, to obtain more performance and accountability of the team.
This training is for Managers in Factory who need to improve their leadership skill. It will allow you to get the basics to create a relationship of trust with your team and increase performance and accountability of the team.
The training is addressed to those who wish to learn how to prepare and facilitate training sessions, how to let participants retain a maximum of information in a limited timeframe and who wish to give the means to participants to retain selected information.