Book Training

This training will give you guidance to develop a Request For Quotation from an automotive OEM or Supplier, optimize your chances of success and improve your commercial success chances.

This training gives the definitions of the different phases needed to manage efficiently a project. It will allow you to understand the different phases of development, to know the OEM requirements and to ensure the effective management of your projects.

This training is certified by FIEV.

The training aims to make you acquire the fundamentals of the IATF 16949 standard in order to implement them in your automotive quality certification project.

This training is certified by FIEV.

FIEV 2.0 Audit preparation training aims to introduce the FIEV 2.0 Standard. It will give you input and key success factors for audit preparation for self-assessment, for internal audits and before official audits.

This training is for suppliers or potential suppliers interested in understanding the requirements of Stellantis through the SQM (Supplier Quality Manual) and enable to implement the provisions, methods and tools for successful project.

This training is to permit potential suppliers or suppliers of the Renault group to understand the Renault project development methodology, know the purchasing quality tools and can implement the methods and tools to make their Renault projects a success .

The RSA B2B portal tools training provide overview of most important tools used for managing claims, project and provide information about supplier performance. Training is updated at the last changes implemented in 2018.

This training gives you a complex approach to audits, it is aimed at those who wish to assimilate and implement a structured approach, organize and perform audits of production processes.

The training Stellantis B2B portal as a part of SQA will provide you an overview of most important tools and methods used for managing of projects, quality assurance, logistics topics as well as the information about evaluation of supplier´s performance.

This training will allow the participants to acquire the fundamentals of the APQP, PPAP, FMEA, MSA, SPC manuals in order to implement them in your internal automotive project management or at your suppliers.

This training is certified by FIEV.

The purpose of the training is to introduce you to the tools of the MSA - AIAG manual to be able to verify and qualify your measuring systems by variable and attribute.

This training is certified by FIEV.

The purpose of the training is to introduce you to the tools of the SPC - AIAG manual in order to acquire the basic concepts of Statistical Process Control to implement and manage the data.

The purpose of the training is to be capable to make a Process FMEA, it will help you to better prepare your FMEA, by building a multidisciplinary team working on reliable input data in order to be able to lead working groups for the implementation of your FMEA.

This training is certified by FIEV.

Reverse FMEA is a structured process of continuous improvement that aims to ensure the permanent updating and progress of an FMEA (Failure Mode and Effect Analysis) study. This risk assessment method is based on reality and not predictive reliability. The purpose of the training is to introduce you to different tools that will help you perform a Reverse FMEA at your plant.

This training will allow participants to develop their knowledge to deal with problem solving: Improve defect detection, manage quality crisis, manage quality firewalls, manage problem solving in the organization with Fast Response / QRQC processes, lead workshops and use specific tools like 8D, QRQC, 5W, PDCA, and put them into practice through exercises.

This training will allow participants to develop their knowledge of problem solving methods through the 8D/QRQC method & process and to put them into practice through exercises. It will allow you to lead or participate in problem solving groups.

This training is certified by FIEV.

Verification of Standard Compliance (VRS) by multilevel audits.

LPA or job observations, depending on the company culture, are approaches that closely associate the operational management of organizations with the requirements of process monitoring.

On the one hand, they reinforce the bidirectional managerial relationship between managers and their employees, and on the other hand, they aim to make each line of authority responsible on its own perimeter for the respect of standards and thus on its own quality performance vis-à-vis of the clients.

This training will enable you to implement a structured organization of LPA (post observation / multilevel audits) at all hierarchical levels by integrating it into the daily management of the workstations up to the top management level.

This training is certified by FIEV.

This training enable you to know 5S methods and it’s application on a pilot project during a workshop with your team. 5S practice purpose is to set up a safe, clean and tidy-up work environment and set up baselines for continuous improvement culture.

The purchase is a strategic lever that will allow you to: (1) Develop and manage relationships with suppliers; (2) Contribute to the innovation process; (3) Control the risks; (4) Optimize costs; (5) Create value.

This training is addressed to all public actors, Managers and Project Managers involved in cost reduction.

GLOBAL MMOG/LE training is addressed to automotive suppliers that are interested in assessing their logistics capability and highlighting the weak points in their logistics organization. Global MMOG/LE standard is the right tool to achieve those objectives, continuously improve logistics standards, significantly reduce logistics costs and fulfill customer expectations. GLOBAL MMOG/LE is a logistics evaluation tool recommended by GALIA/ODETTE.

This training is addressed to suppliers or potential suppliers of Stellantis Group that are interested in using all the logistics applications of the Stellantis B2B Portal.

This training is addressed to suppliers or potential suppliers of Renault to be able to use all the logistics applications of the Renault B2B Portal.

This training is for project team members who need to improve their leadership skill. It will allow you to adapt your project manager's behaviors to increase the efficiency of the team and create a relationship of trust with the project actors, to obtain more performance and accountability of the team.

This training is for Managers in Factory who need to improve their leadership skill. It will allow you to get the basics to create a relationship of trust with your team and increase performance and accountability of the team.

The training is addressed to those who wish to learn how to prepare and facilitate training sessions, how to let participants retain a maximum of information in a limited timeframe and who wish to give the means to participants to retain selected information.

This training is provided in cooperation with TÜV Rheinland to equip you with the knowledge needed to successfully implement the requirements of the international standard ISO 26262:2018. On the fourth day of the course, you will sit the exam to become a certified TÜV Rheinland Functional Safety Engineer (Automotive).

This training is conducted in partnership with Kugler Maag.

This training course provides a systematic implementation to ISO 26262 and its practical application. If there are still gaps in your understanding of functional safety, ISO 26262 or maturity models, this course provides you with a complete overview and you will be in a position to complete tasks in keeping with standard requirements and common industrial practice.

This training is conducted in partnership with Kugler Maag.

SOTIF helps you estimate whether the intended function of an application may present potential hazards. So it is not just about protecting systems from malfunctions, which is the original protection goal of functional safety. This new area requires a different approach towards analysing systems. This training course introduces you to the subject matter of the PAS 21448 standard and suitable procedures. As such, it offers fast-track training and practical examples to understand how to apply the new methods.

This training is conducted in partnership with Kugler Maag.

This course, which is certified by German technical inspectorate TÜV Nord, equips you with specific insights into different ways to develop cybersecurity requirements in an automotive setting. These include the automotive security standard ISO/SAE DIS 21434, the homologation requirements of the United Nations Economic Commission for Europe (UNECE), functional safety (ISO 26262) and the security add-on to Automotive SPICE®.

This training is conducted in partnership with Kugler Maag.

In this training you'll be familar with both theoretical and practical knowledge on TARA, the designated risk assessment method of the ISO/SAE 21434 international standard. In the automotive industry, this ISO standard expects company's developing electronic systems to perform TARA multiple times in their entire vehicle or product lifecycle. According ISO/SAE 21434, Clause 8, each risk assessment is done in seven consecutive steps. This requirement – performing TARA on a regular basis and in a controlled manner – results in TARA becoming the pivotal point of cybersecurity-oriented processes.

This training is conducted in partnership with Kugler Maag.